Even newer Custom Firmware for Xiaomi Cameras based on Hi3518ev200 Chipset. It includes free RTSP, ONVIF and other improvements based on the work by roleoroleo

Official Discord Server Releases Downloads

Why this Yi-Hack-V5 firmware?

The answer is simple: missing updates, RTSP and not based on the latest stock firmware (which features improvements and new cool stuff). Besides, there were no updates to Yi-Hack-V4, and I am really against that RTSP licensing model. I have contributed enough and will continue my work separately.

I am slowly releasing beta versions, and I can see lots of downloads, testing and contributions. A big thank you to the community.

Table of Contents

Features

This firmware will add the following features:

  • NEW FEATURES
    • NEW CAMERAS SUPPORTED: Yi Outdoor 1080p and Yi Cloud Dome 1080p.
    • RTSP server - which will allow a RTSP stream of the video while keeping the cloud features enabled (available to all and its free).
    • MQTT - detect motion directly from your home server!
    • WebServer - user-friendly stats and configurations.
    • SSH server - Enabled by default.
    • Telnet server - Disabled by default.
    • FTP server - Enabled by default.
    • Web server - Enabled by default.
    • The possibility to change some camera settings (copied from the official app):
      • camera on/off
      • video saving mode
      • detection sensitivity
      • status led
      • ir led
      • rotate
    • PTZ support through a web page.
    • Snapshot feature
    • Proxychains-ng - Disabled by default. Useful if the camera is region locked.
    • The possibility to disable all the cloud features while keeping the RTSP stream.

Supported cameras

Currently this project supports the following cameras:

  • Yi 1080p Home 48US - confirmed
  • Yi Home 17CN / 27US / 47US - confirmed
  • Yi Dome - confirmed, but heavy performance issues with Snapshot and ONVIF is killing the CPU
  • Yi 1080p Dome - confirmed; however, I have no device to test
  • Yi 1080p Cloud Dome - confirmed; however, I have no device to test
  • Yi 1080p Outdoor - confirmed; however, I have no device to test

Getting Started

  1. Check that you have a correct Xiaomi Yi camera. (see the section above)

  2. Get an microSD card, preferably of capacity 16gb or less and format it by selecting File System as FAT32.

IMPORTANT: The microSD card must be formatted in FAT32. exFAT formatted microSD cards will not work. I have not formatted any of my 32GB cards in order to load the firmware. Just copy files directly and it should work.

How to format microSD cards > 32GB as FAT32 in Windows 10

For microSD cards larger than 32 GB, Windows 10 only gives you the option to format as NTFS or exFAT. You can create a small partition (e.g 4 GB) on a large microSD card (e.g. 64 GB) to get the FAT32 formatting option.

  • insert microSD card into PC card reader
  • open Disk Management (e.g. Win+x, k)
    • Disk Management: delete all partitions on the microSD card
      • right click each partition > "Delete Volume..."
      • repeat until there are no partitions on the card
    • Disk Management: create a new FAT32 partition
      • right click on "Unallocated" > "New Simple Volume..."
      • Welcome to the New Simple Volume Wizard: click "Next"
      • Specify Volume Size: 4096 > "Next"
      • Assign Drive Letter or Path: (Any) > "Next"
      • Format Partition: Format this volume with the following settings:
        • File system: FAT32
        • Allocation unit size: Default
        • Volume label: Something
        • Perform a quick format:

You should now have a FAT32 partition on your microSD card that will allow the camera to load the firmware files to update to yi-hack-v5.

Example: 4 GB FAT32 partition on 64 GB microSD card

example: 4 GB FAT32 on 64 GB

  1. Get the correct firmware files for your camera from this link: https://github.com/alienatedsec/yi-hack-v5/releases
Camera rootfs partition home partition Remarks
Yi Home 17CN / 27US / 47US rootfs_y18 home_y18 Firmware files required for the Yi Home 17CN / 27US / 47US camera.
Yi 1080p Home rootfs_y20 home_y20 Firmware files required for the Yi 1080p Home camera.
Yi Dome rootfs_v201 home_v201 Firmware files required for the Yi Dome camera.
Yi 1080p Dome rootfs_h20 home_h20 Firmware files required for the Yi 1080p Dome camera.
Yi 1080p Cloud Dome rootfs_y19 home_y19 Firmware files required for the Yi 1080p Cloud Dome camera.
Yi Outdoor rootfs_h30 home_h30 Firmware files required for the Yi Outdoor camera.
  1. Save both files and the folder on root path of microSD card.

IMPORTANT: Make sure that the filename stored on microSD card are correct and didn't get changed. e.g. The firmware filenames for the Yi 1080p Dome camera must be home_h20 and rootfs_h20.

  1. Remove power to the camera, insert the microSD card, turn the power back ON.

  2. The yellow light will come ON and flash for roughly 30 seconds, which means the firmware is being flashed successfully. The camera will boot up.

  3. The yellow light will come ON again for the final stage of flashing. This will take up to 2 minutes.

  4. Blue light should come ON indicating that your WiFi connection has been successful.

  5. Go in the browser and access the web interface of the camera as a website.

Depending upon your network setup, accessing the web interface with the hostname may not work. In this case, the IP address of the camera has to be found.

This can be done from the App. Open it and go to the Camera Settings --> Network Info --> IP Address.

Access the web interface by entering the IP address of the came in a web browser. e.g. http://192.168.1.5:8080

IMPORTANT: If you have multiple cameras. It is important to configure each camera with a unique hostname. Otherwise the web interface will only be accessible by IP address.

  1. Done! You are now successfully running yi-hack-v5!

Unbrick your camera

TO DO - (It happened a few times and it's often possible to recover from it)

Acknowledgments

Special thanks to the following people and projects, without them yi-hack-v5 wouldn't be possible.

Acknowledgments #2

As much as TheCrypt0 has made it possible for the 'yi-hack-v4', the latest features are based on the work from:


DISCLAIMER

I AM NOT RESPONSIBLE FOR ANY USE OR DAMAGE THIS SOFTWARE MAY CAUSE. THIS IS INTENDED FOR EDUCATIONAL PURPOSES ONLY. USE AT YOUR OWN RISK.

DONATIONS

I HAVE BEEN ASKED FOR A LINK MULTIPLE TIMES; THEREFORE, PLEASE FOLLOW THE BELOW

paypal

Comments
  • Can't get 0.3.0 to install

    Can't get 0.3.0 to install

    I have successfully installed two Yi Outdoor 1080p cameras with yi-hack-v5 v0.3.0. One was on a clean SD card (which was not yet provisioned), and the other was over an existing remote yi-hack-v4 v0.2.0. There were no problems encountered on either one.

    I am now trying to install yi-hack-v5 on a third Yi Outdoor 1080p over an existing remote yi-hack-v4. I have done everything exactly the same as the first two, i.e., from my PC:

    # cd yi-hack-v5/yi-outdoor
    # ls -l
    total 8601
    -rw-r--r-- 1 rwk rwk 7792172 Apr 14 05:03 home_h30
    -rw-r--r-- 1 rwk rwk 1014184 Apr 14 05:03 rootfs_h30
    drwxr-xr-x 9 rwk rwk      10 Apr 14 05:04 yi-hack-v5
    # scp -rp ./ [email protected]:/tmp/sd/
    home_h30                              100% 7610KB 218.8KB/s   00:34    
    rootfs_h30                            100%  990KB 216.4KB/s   00:04    
    mqttv4.conf                           100% 1854    53.5KB/s   00:00    
    ...
    # ssh [email protected]
    # reboot && exit
    

    But when the camera comes back online, yi-hack-v4 has booted. I rebooted again, but still it boots to yi-hack-v4.

    Here is an ls -l of /tmp/sd on the camera in question, still running v4:

    rwxr-xr-x    1 root     root       7792172 Apr 14 11:03 home_h30
    -rwxr-xr-x    1 root     root             0 Apr 27 23:48 last-download
    drwxr-xr-x    2 root     root        131072 Apr 28 12:04 log
    drwxr-xr-x  479 root     root        131072 Apr 27 23:48 record
    -rwxr-xr-x    1 root     root       1014184 Apr 14 11:03 rootfs_h30
    drwxr-xr-x    3 root     root        131072 Apr 28 11:52 save
    drwxr-xr-x    9 root     root        131072 Apr 14 11:04 yi-hack-v5
    

    Is there some way to force it to install and boot yi-hack-v5?

    Thanks!

    P.S. The camera is in a difficult to access location, so I cannot readily retrieve the SD card. I would like to get it to work remotely.

  • [yi dome 1080p] MQTT seems not to work

    [yi dome 1080p] MQTT seems not to work

    Hello, I run Home Assistant with mosquitto. Seems that camrea tries to connect but then disconnects and motion detection is not working. This is part of mosquitto log:

    [12:02:20] INFO: [INFO] found mqttUser on local database 1618135340: New client connected from 192.168.1.XXX as xxxDome1 (p2, c1, k120, u'mqttUser'). 1618135571: Socket error on client xxxDome1, disconnecting. 1618136267: New connection from 192.168.1.XXX on port 1883. [12:17:48] INFO: [INFO] found mqttUser on local database 1618136268: New client connected from 192.168.1.XXX as xxxDome1 (p2, c1, k120, u'mqttUser'). 1618136269: Socket error on client xxxDome1, disconnecting.

  • Safe to update over yi-hack-v4 (using their update home/rootfs menu)?

    Safe to update over yi-hack-v4 (using their update home/rootfs menu)?

    I am SO happy to see this release. I have so many problems with rtspv4/viewd. I have Allwinner on my Yi indoor cameras and it works flawlessly. Did you base the rtsp server on the Allwinner code?

    Is it possible/safe to use the yi-hack-v4 web update (in the Update section) to upload and install the yi-hack-v5 home and rootfs files?

    I hope so, because access to my installed outdoor cameras is difficult, i.e. to retrieve the SD card...

    Thanks for this release! I am looking forward to using it with great anticipation!

  • MQTT motion image causes freeze on motion

    MQTT motion image causes freeze on motion

    I have upgraded from v4 + rtsp to v5 0.3.1. I get a nice reliable stream with MQTT off. Switching on MQTT the stream stutters and grinds to a halt a few seconds after waving my hand in front of the camera. The web UI also becomes unavailable.

    My suspicion is it is caused by the resource usage of the motion snapshot feature which was not present in v4. It is necessary to unplug the camera to get it responding again. I have swapfile enabled.

    I would appreciate some guidance in debugging this. Is there a change I can make to disable the motion snapshot feature with MQTT enabled to test my theory?

  • Any chance for Yi Dome 1080p support?

    Any chance for Yi Dome 1080p support?

    @alienatedsec please consider building h20 image if possible, I will be happy to test. I tried using only home_y20 after renaming to home_h20, leaving original root_h20 from Keroi/yi-hack-v4 build - it did not work.

    Can you possibly share some links to prepare own image - I am proficient with Linux, just going through the noise on Discord and having over 100 forks of v4 just overwhelms me to say at least.

    Another question - should it be enough to just ssh contents of home partition to a running h20 image, replacing existing files? Maybe there is a way to mount home file using loop? I just need streaming support for home assistant with PTZ, ONVIF might do the trick.

  • Camera randomly rebooting

    Camera randomly rebooting

    Hello,

    I own a Yi Dome camera and I know it has some hardware limits, so I was experiencing some camera freezes (it was responding to ping but no mqtt, ssh or httpd services - like reported in other tickets - the only solution was to power-cycle) and I spent some time in fine-tuning the settings to limit the resources consumptions (onvif off, mqtt on, low rtsp, cloud disabled, local recording, ssh on, httpd on, mqtt Topic Suffix for jpeg image empty and mqtt AI and sound detections empty as well). Anyway I was still experiencing the same frequent freezes. So I also decreased the swappiness threshold value to 40. From that moment things seemed to work properly but a couple of times each day I discovered the privacy switch (I'm using @roleoroleo 's HA custom integration as well) was off instead on. I had the feeling the camera was randomly rebooting (without hanging) and today I had the confirmation of this behaviour.

    From the attached screenshots you can see the hack integration recorded a disconnection at about 20:03 which is also confirmed by the privacy sensor becoming unavailable and the mqtt will message "offline". Additional confirmation of this behaviour is the screenshot of the camera status that shows 57 minutes of uptime. After the camera reboot the privacy switch is reset to off (instead on, which was the initial state).

    Long story short: the camera is randomly rebooting, in absence of motion detection/recording or events that may trigger a resources consumption.

    Is anybody else experiencing a similar behaviour or has suggestions to solve/investigate it? Thank you!

    Schermata 2022-08-26 alle 21 28 45

    Schermata 2022-08-26 alle 21 00 23

  • How to convert from MStar hack to yours?

    How to convert from MStar hack to yours?

    Trying to flash your firmware over roleoroleo /yi-hack-MStar for my 1080P Yi Dome BFUS | 4.6.0. Copied your files to the sd card, but the firmware did not flash. Is is possible to overwite Yi-Hack from one builder to another?

  • [yi-outdoor] 64GB sd card does not updates from yi-hack-4

    [yi-outdoor] 64GB sd card does not updates from yi-hack-4

    Just like it is mentioned in https://github.com/alienatedsec/yi-hack-v5/issues/39 and I think we should take care of it. Seems that big sd cards like 64 GB fail to boot and load y-hack-v5 although yi-hack-v4 was working and booting just fine.

  • Changing from yi-hack-v4 from TheCrypt0 to V5

    Changing from yi-hack-v4 from TheCrypt0 to V5

    I installed the V4 from TheCrypt0 and I was trying to flash your V5. I have followed all the steps I have seen online, here and closed issues on it. I have not been successful in flashing your V5 over TheCrypt0 V4. Can I flash one firmware over the other? I am currently trying it on a Yi Dome 720p YHS-1916.

  • [Yi Outdoor 1080p] High resolution snapshot segmentation fault

    [Yi Outdoor 1080p] High resolution snapshot segmentation fault

    Taking a high resolution snapshot does not working on a Yi Outdoor camera. Low resolution snapshot works.

    Problem occurs with and without swap file.

    /tmp/sd/yi-hack-v5 # imggrabber -m yi_outdoor -r high --debug
    Debug on
    Starting program
    Resolution high
    1618234144057 - mapping file /tmp/view, size 1586752, to b6d4d000
    1618234144058 - closing the file /tmp/view
    1618234144058 - found latest frame: id 143, frame_counter 13942
    1618234144058 - processing frame 143
    1618234144084 - processing frame 143
    1618234144084 - writing frame: frame_offset 1022604, frame_ptr b6e500cc, frame_length 37
    1618234144100 - processing frame 144
    1618234144101 - writing frame: frame_offset 1022648, frame_ptr b6e500f8, frame_length 8
    1618234144119 - processing frame 145
    1618234144120 - writing frame: frame_offset 4, frame_ptr b6d56644, frame_length 59674
    7400159931599476 - frame found, exit loop
    Decoding h264 frame
    Segmentation fault
    
  • New Yi Outdoor Not Flashing

    New Yi Outdoor Not Flashing

    I just bought a new Yi Outdoor 1080p from Amazon. I installed yi-hack-v5 on a 16GB SD card the same as I have on three other Yi Outdoor cameras. However, this new one fails to flash. It just boots Yi firmware.

    • The camera is labeled (below the QR code): IFUSY59UOS
    • On the label next to the QR code it says: Model: YHS.3020
    • Firmware is: 9.0.26.07_202104231123

    The other cameras (that work) are labeled:

    • (Below the QR code) 9CUSYFDJT7
    • Model: YHS.3017

    Is there anything I can try to get the new camera to work? Or is there any other information needed to diagnose the problem? Does anyone else have this camera or know anything about it (different chipset etc?)

    I will have to return the camera if it cannot be flashed. (very sad)

    P.S. I also tried to flash yi-hack-v4 (also without success).

  • Reset camera via remote shell?

    Reset camera via remote shell?

    I would like to be able to perform the same sort of reset of the camera as is achieved by holding in the reset button on the back while powering on. Is there a command that can be run that will achieve the same result?

    My guess is that holding in the button clears some portion of the nvram, but I'm not sure if that can be accomplished via a remote shell.

    I have one camera that occasionally loses the ability to record video and needs a reset/resetup. I can still login remotely and I can even control power to that outlet, but it's a pain to climb up a ladder and hold in the button as it is high up.

  • No more WiFi connection Dome camera 1080p (log_no_wifi_dev)

    No more WiFi connection Dome camera 1080p (log_no_wifi_dev)

    Hello. I have 2 Dome 1080p cameras. After applying the settings in the web interface, one camera lost Wi-Fi connection. The camera can be flashed in stock and yi-hacks v4 and v5. But it cannot connect to wifi. When I turn it on, I hear "Waiting to connect". Then I select the network, the qr code is generated, the camera reads it without problems: "QR code scan, connectet to WI-FI", the blue diode blinks, then lights up yellow and reboots. And so endlessly. The loops are ok. I tried to swap boards, the problem is the same on this board with different cameras. The login and password are correct in wpa_supplicant.conf. What do these lines mean in log.txt?

    [./rmm][1/19/6:41:58:942]: got RMM_SPEAK_CONNECTTING[./dispatch][1/19/6:41:59:595]: wifi disconnected, now reconnect wifi
    [./watch_process][1/19/6:42:1:235]: cloud crashed![./watch_process][1/19/6:42:1:236]: p2p_tnp crashed![./watch_process][1/19/6:42:1:237]: arp_test crashed![./dispatch][1/19/6:42:8:277]: wpa may crashed, now reset
    [./dispatch][1/19/6:42:8:329]: no usb dev
    
  • Cameras start to reboot in about one month of use

    Cameras start to reboot in about one month of use

    I have got 5 Yi-Home 1.080p cameras with 128gb SD Cards, and successfully applied the firmware in all of them. Everything seemed to be working fine but...

    Once in a while (about once a month) one of the cameras starts to keep rebooting and rebooting, and never passes the yellow light. The way I found easier to work it out was to reapply the firmware in them. So I have a 16Gb SD ready with the hacked firmware, and when a camera starts to reboot, I switch the SD for this one, wait some minutes and switch them again. It works all the times.

    Ok, that is working for me. But the big question: WHY? Does anyone have any ideas? What can I do to test or to find out what the problem must be?

    Thanks!

  • High CPU usage on `rmm` with slow responsiveness

    High CPU usage on `rmm` with slow responsiveness

    Hi there. Thanks for the project. I flashed my Yi Dome camera yesterday, however the web ui is not very responsive, e.g., it takes many seconds to load the content. I then SSH to the camera and found that ./rmm is constantly using ~40% of the CPU. May I know what does it do and if it's possible to stop it?

    Mem: 17764K used, 828K free, 572K shrd, 8K buff, 2496K cached
    CPU:  4.6% usr 93.5% sys  0.0% nic  0.0% idle  0.6% io  0.0% irq  1.2% sirq
    Load average: 17.61 14.55 11.61 5/241 22676
      PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
      941     1 root     S    19088102.5   0 22.9 ./rmm
    22607     1 root     S     7988 42.9   0 12.2 ./p2p_tnp
      570     2 root     RW       0  0.0   0 10.2 [mmcqd/1]
    

    Disk usage:

    /home/yi-hack-v5 # df -h
    Filesystem                Size      Used Available Use% Mounted on
    /dev/root                 1.3M      1.2M     84.0K  93% /
    tmpfs                     9.1M      4.0K      9.1M   0% /dev
    /dev/mtdblock5           12.7M      7.8M      4.8M  62% /home
    tmpfs                    16.0M    812.0K     15.2M   5% /tmp
    /dev/mmcblk0p1           14.8G      3.8G     11.0G  26% /tmp/sd
    /dev/mmcblk0p1           14.8G      3.8G     11.0G  26% /tmp/sd/yi-hack-v5/www/record
    

    Memory usage:

    /home/yi-hack-v5 # free
                  total        used        free      shared  buff/cache   available
    Mem:          18592       15500         604           0        2488           0
    -/+ buffers/cache:        15500        3092
    Swap:         65532        3472       62060
    

    Thanks!

  • Seems to work on Yi Dome 1080p with some bugs

    Seems to work on Yi Dome 1080p with some bugs

    Hello, I open this issue to tell firmware seems to work on my Yi Dome 1080p but with following bugs, after flashing firmware 0.3.4:

    • by default, camera appears off though if appears "switch On" under Settings => General (see below image). I had to switch Off, then save configuration, then reboot camera, then turn on swith, save configuration and reboot camera. Now the camera is turn on. immagine

    • by default, Yi Home app can't connect to modified camera. I had to do the same thing as previous point, that 's to say disable cloud (Config=> General ) though the button was unchecked (see below image), saving and reboot camera. enable cloud with saving conf and rebooting camera. Now I am able to use Yi home app. immagine

    • when I turn off camera from Yi Home app, web interface does not sync (no "switch Off" under Settings => General)

    I have yet to try all the other features. I will update this thread.

  • Yi Dome 1080P 15US - recording broken on 0.3.4

    Yi Dome 1080P 15US - recording broken on 0.3.4

    I've noticed that recording files on SD card are broken after using 0.3.4 firmware version- some files are missing (like they were overwritten). Using 0.3.3 works like a charm

Use rtsp protocol to push local H265 video encoding files

rtspServerH265 Use rtsp protocol to push local H265 video encoding files 项目介绍 C++11实现的RTSP服务器和推流器。主要完成对H265视频编码文件的RTSP推流 使用说明 1.编译并运行程序; 2.打开VLC软件,在媒体

Oct 12, 2022
RTSP Wasm Player
RTSP Wasm Player

RTSP Wasm Player Overview # RTSP WebSocket Proxy RTSP/Webcam/File > FFmpeg open > Packets > WebSocket # WS Wasm Player WebSocket > Packets > Wasm FFm

Nov 27, 2022
A RTSPServer for RTS3903N based IP Cameras (Yi Camera Inspired)

RTSPServer for RTS3903N based YI Cameras While this repo is focused on Yi based cameras, it should compile and run on any RTS3903N based camera! Backg

Nov 23, 2022
Hack to allow live streaming from wyze cameras to vlc or mpv on your desktop.
Hack to allow live streaming from wyze cameras to vlc or mpv on your desktop.

Wyze Cam Live Streaming This is a hack to allow live streaming from a wyze cam on your local network. Installation - New! The simplest fix for wyze ev

Oct 25, 2022
NymphCast is a audio and video casting system with support for custom applications.
NymphCast is a audio and video casting system with support for custom applications.

NymphCast is a software solution which turns your choice of Linux-capable hardware into an audio and video source for a television or powered speakers. It enables the streaming of audio and video over the network from a wide range of client devices, as well as the streaming of internet media to a NymphCast server, controlled by a client device.

Dec 1, 2022
FFmpeg coding tutorial - learn how to code custom transmuxing, transcoding, metadata extraction, frame-by-frame reading and more

FFmpeg code examples FFmpeg coding tutorial - learn how to code custom transmuxing, transcoding, metadata extraction, frame-by-frame reading and more

Nov 29, 2022
A work-in-progress homebrew YouTube client for new 3DS
A work-in-progress homebrew YouTube client for new 3DS

ThirdTube A work-in-progress homebrew YouTube client for the new 3DS GBAtemp Thread Instability Warning As this app is still in the alpha stage, you m

Nov 19, 2022
Custom FFMpeg build script which support cross-compile to macOS/iOS/android

FFmpegCompileScript Custom FFMpeg build script which support cross-compile to macOS/iOS/Android Usage: First, init all submodule: git submodule update

Apr 20, 2022
Free plugin-based video converter
Free plugin-based video converter

SEZE II Смотреть на русском SEZE is a plugin-based video converter for Windows/Linux. You can write your video filter in C++ (see section "How to make

Nov 21, 2022
Kodi is an award-winning free and open source software media player and entertainment hub for digital media
Kodi is an award-winning free and open source software media player and entertainment hub for digital media

website • docs • community • add-ons Welcome to Kodi Home Theater Software! Kodi is an award-winning free and open source software media player and en

Dec 1, 2022
Olive is a free non-linear video editor for Windows, macOS, and Linux.
Olive is a free non-linear video editor for Windows, macOS, and Linux.

Olive is a free non-linear video editor for Windows, macOS, and Linux.

Nov 30, 2022
Free and open-source media player written in C++

Liquid Media Player Free and open-source media player written in C++. Currently in development. Build Guide Windows Install the MSYS2 Building Platfor

Sep 20, 2022
OpenShot Video Library (libopenshot) is a free, open-source C++ library dedicated to delivering high quality video editing, animation, and playback solutions to the world

OpenShot Video Library (libopenshot) is a free, open-source C++ library dedicated to delivering high quality video editing, animation, and playback solutions to the world

Dec 3, 2022
🎥 mpv is a free (as in freedom) media player for the command line.
🎥 mpv is a free (as in freedom) media player for the command line.

mpv is a free (as in freedom) media player for the command line. It supports a wide variety of media file formats, audio and video codecs, and subtitle types.

Nov 25, 2022
Shotcut - a free, open source, cross-platform video editor
 Shotcut - a free, open source, cross-platform video editor

cross-platform (Qt), open-source (GPLv3) video editor

Nov 27, 2022
A free, fast, cross-platform volumetric codec for everyone.

The open source Universal Volumetric (".uvol") compressed interchange format for streaming mesh sequences. This project also includes a cross-platform player implementation using h.264 video for texture.

Nov 30, 2022
Video stabilization is a software-based approach in real-time to eliminating environmental effects (wind, heavy vehicle etc.) and enhance the visual performance that degrade video streaming quality.
Video stabilization is a software-based approach in real-time to eliminating environmental effects (wind, heavy vehicle etc.) and enhance the visual performance that degrade video streaming quality.

Video Stabilization Contents General Info Installation To Do General Info Video stabilization is a software-based approach in real-time to eliminating

Nov 23, 2022
Jellyfin Desktop Client based on Plex Media Player
Jellyfin Desktop Client based on Plex Media Player

Desktop client using jellyfin-web with embedded MPV player. Supports Windows, Mac OS, and Linux. Media plays within the same window using the jellyfin-web interface unlike Jellyfin Desktop. Supports audio passthrough. Based on Plex Media Player.

Nov 30, 2022
simple mp4 player based on rockchip rv1109 platform

mp4player RV1109平台上实现一个简单的 mp4 播放器,主要是本人使用的开发板QT无法播放mp4,应该是没有编译qst所致,因而想利用rockchip平台自有的 功能实现一个简单的播放器。 base目录包含一些基础框架实现,包含信号,线程,时间等,线程和消息泵的实现非常非常简单,因而不

Jul 17, 2022