VR15: a VR FPS game controller that generates haptic feedback with high-pressure air.
TI TMP102 Driver Simple driver for the TI TMP102 I2C temperature sensor. For use with TI TM4C123X MCUs and TI's TivaWare™ Peripheral Driver Library. D
STM32F10x-LM75A-Library LM75A temperature sensor library that you can use with STM32F10x series microcontrollers. Launching the LM75A sensor in your a
EINK STARTER MONITOR See full blogpost here Tracks height of starter with a VL6180 i2c distance sensor, and CO2/temperature/humidity with an SCD30. A
ICM42688 Collection of Arduino sketches for TDK's combo accel/gyro motion sensor The basic sketch configures the sensors' data rates and full scale se
ZLinky_TIC Téléinformation Linky autoalimenté communiquant en ZigBee 3.0 Description PCB ZLinky_TIC est un appareil permettant de transmettre toutes l
VEML7700 Light Sensor driver for ESP-IDF Overview This project aims to provide a very simple interface for configuring and reading data from the VEML7
Dynamic Templates This is a copy of the D*I*Y Planner Dynamic Template application that was posted to diyplanner.com/node/6210 back in 2009,
Wordclock ESP32 based DIY wordclock project TL;DR: check out this ✨ demo video ✨ Another take on the classic DIY word clock. This one requires a laser
Introduction Green-Shield is an Arduino R3 shield for temperature, humidity, soil moisture and ambient light optimized for use in greenhouses where th
My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.
Vindriktning-plus Updated Vindriktning with Wifi Connectivity, Motion sensor, Temperature and Humidity Inspired & parts of the code are used from: htt
Aosong ASAIR AHT1x/AHT2x This is an Arduino library for Aosong ASAIR AHT10/AHT15/AHT20/AHT21/AHT25/AM2301B/AM2311B Digital Humidity & Temperature Sens
Timer-Interrupt Automatic street light control using LDR as the sensor and an LED as an example of street light. Performed a small simulation of an ar
A simple standalone motion activated controller for WS2812b LED lights Version 0.30 adds the ability to change settings from a web interface without r
Arduino Datalogger A custom data logger based on ATmega32u4 with a custom PCB. The device features the following main components: Atmel ATmega32u4 MCU
SHT2x Arduino library for the SHT2x and HTU2x temperature and humidity sensors. Description The SHT2x family of sensors should work up to 400 KHz I2C.
SIGGRAPH ASIA 2021 Technical Communications Transition Motion Tensor: A Data-Driven Framework for Versatile and Controllable Agents in Physically Simu
Morse decoder The project's idea is very simple, the Arduino program has the responsibility to upload the sensor's data to the USB serial port.
